Double Glazing Lock Repairs
The use of high-quality locks on your windows and doors helps to prevent burglars from getting into your home. They usually don't want to break glass or attempt to get through windows that are open.
However, some double-glazing owners have experienced issues with their door lock or window lock after it was installed. These issues can usually be fixed without the need for a new double glazing.
Broken or damaged locks
If your uPVC window or door lock is damaged or broken and requires a locksmith, they can fix it. They will be able to fix the striker plates, hinges, and locks on your double glazing. They can also move the cylinder around to correct any misalignment issues that may be causing the handle to not function correctly.
The mechanism may be locked when the key is inserted into the lock, but it will not turn or become difficult to insert. This could be due to dirt or grime accumulating within the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. It is crucial to apply a dry lubricant such as graphite or teflon instead of oil which attracts dirt and stick to the inside of the mechanism. After lubricating the lock, you must insert the key and attempt to turn it. The lubricant should work through the mechanism and the lock should be able to turn with ease.
A malfunctioning lock could be caused by loose screws within the lock mechanism. They can loosen and fall out or break off completely which can stop the lock from working properly. The screws can be tightened using the help of a screwdriver. However, be cautious not to tighten them too much. This could damage the internal components.
A broken lock can be dangerous for both you and your family members, especially if you have small children. They could easily open the door without knowing, giving them access to your house. If you're worried about the possibility that this could happen, a vetted professional locksmith can help secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair all kinds of damaged and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also modify your uPVC or double glazing locking system to meet your specific requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Handles that are broken or damaged
A lot of double-glazed windows come with the multi-point lock as part of the overall security package. This is a great choice for those worried about potential thieves who may try to gain access to your home. It's also worth asking your locksmith about anti-lift blocks, these can be fitted in addition to the existing locks and ensure that your window is locked in the closed position.
Handle locks can be damaged or fail. They are the first thing criminals will use to force open your window. Fortunately, the good news is that this is among the easiest parts to fix.
Modern uPVC handles and aluminum handles are equipped with the multi-point locking mechanism referred to as Espagnolette which is designed to prevent forced entry. This security upgrade is often provided as an additional option on new uPVC window installation. As an optional upgrade, older style uPVC or aluminium handles that are no longer used can be upgraded to the shoot bolt locking system.
When a handle is faulty it's crucial to get it repaired as quickly as you can. Faulty handles may prevent the window from closing properly and permit drafts to get in. It may also be a weakness that burglars who are opportunistic might exploit, putting your belongings and family at risk of being taken.
The process of fixing the malfunctioning mechanism begins by gaining access to the window frame and removing the damaged handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be sourced which matches the profile of the internal window frame mechanism.
After the mechanism has been repaired the handle can be reattached using the original screws. We recommend replacing them with more long screws since they provide the most secure fit. The final step is to apply a layer of clear sealant to shield the handle from further corrosion. Once you've completed this step your window will be functioning again at a fraction the cost of replacing it.
Hinges that are Broken or damaged
If your windows aren't shut properly, draughts could enter your home, the security barriers will become weaker and there's an increased chance of water damage or damp. Windows hinges that break or fail to function properly are a common occurrence and can be easily repaired.
If your uPVC windows don't open or close, it is likely that the hinges require to be replaced or repaired. Most window companies will require you to buy an entirely new window unit to resolve this issue, but we are able to replace the hinges and save you money.
Window hinges may break after repeated use, or they could be weakened due to corrosion over time. If you find a broken hinge, it's important to take measures to prevent further damage by being careful not to make the window swing to close or open.
You can find the correct parts for your hinge by identifying its model. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to consult an expert in this situation to ensure that you don't make the mistake of buying parts that are not compatible with your current hardware and could cause further damage.
Faulty hinges are a major problem for uPVC windows and doors. They can be an important source of noise, and could also allow water to infiltrate your windows.
Verify that the pin barrels on both hinge halves are aligned. If double glazing repair 's not then tap the head pin using the hammer to create a shallow bend in the hinge barrel. This will help to keep the pin in place. Ask a friend to hold the doors as you take off hinge screws and hinges. Replace the hinges with those that are of the same size, and install the screws with glue. After the glue is drying, fix the hinges using weights or clamps.
Once your hinges are repaired after which you will be able to put back the door and re-attach the handle. It is a good idea to replace the screws with the same length of dowels as the original screw, so that they are in line with each one.
Glass that is damaged or damaged
While uPVC windows do an excellent job of keeping the cold out and warm in, they may become damaged over time. This can be the case with damaged or broken glass and faulty locks. If neglected, this could become a very costly issue. It can also hurt your home's aesthetics and lead to a loss in insulation. It is important to repair any damage immediately.
You can repair your cracked glass by yourself if you have the appropriate tools and techniques. First, make sure that the surrounding area surrounding the glass is clean so that any shards don't harm anyone and aren't an accident hazard. Next, remove any broken pieces and dispose of them properly. Apply masking tape to the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. Pre-fitting the glass pane prior to applying glue is an ideal option if you are dealing with windows with two panes. This will ensure you have enough space to complete your project.
Before applying the glue wipe the entire surface of the broken frame and glass with a an unclean, dry cloth. Follow the instructions for application and curing times, which can vary from product to. Depending on the degree of the crack you may need to hold the glass to hold it in place while it is curing. You can do this using lightweight clamps specifically designed to support fragile materials.
After the adhesive has fully cured, carefully reinstall the glass inside the window frame, making sure that it is flush with the edge of the frame and that there aren't any gaps between the glass and the window sash. Be careful not to bend the glass when you install it again in order to weaken the seal. This can lead to condensation or water infiltration.
Contact a professional glazier, such as O'Brien(r), to arrange a replacement if your glass window is completely broken. It's important to act quickly in the event of broken glass.